Core Material Manufacturing Study On Aluminum Composite Panel (ACP)
Article Sidebar
Main Article Content
Abstract
An aluminum composite panel (ACP) is a flat panel with aluminum plates/sheets that are rigid and strong but relatively lightweight. Between the two plates, the core material content is generally made of polyethylene and polyurethane. However, the two core materials are not resistant to high temperatures/heat. They are flammable, so it is urgent to make variations of other core materials resistant to high temperatures. This study aims to provide variations for ACP core materials using polymer materials resistant to high temperatures, namely Low-Density polyethylene (LDPE) and Polyoxymethylene (POM). The method used is experimental/fabrication of ACP making. The high-temperature test was carried out in a furnace with a temperature of 3000C, 3500C, and 4000C, each with a holding time of 1 hour. The results obtained from observing the microstructure using an Optical Microscope before and after the test damaged the core material while the Aluminum metal was still intact. The mass of ACP before and after testing also changed. Overall, at the three temperatures above, the LDPE core material does not withstand this temperature because the temperature is above the melting point of the LDPE material.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
M. Selvakumar, Dr.D. Jafrey Daniel James M.E.,Ph.D, Dr.K.R. Thangadurai M.E.,Ph.D, 2021, A Deep Study on Aluminum Composite Panel: Applications, Merits, and Demerits, International Journal of Mechanical Engineering, Vol. 6 (Special Issue, Nov.-Dec. 2021) ISSN: 0974-5823.
Alfari, S, 2016, Getting to Know Aluminum Composite Panel (ACP).
(https://www.arsitag.com/article/mengenal-alumunium-composite-panelacp).
Retrieved December 31, 2023.
.https://www.idntimes.com/news/indonesia/lia-hutasoit-1/material-acp-jadi-biang-kebakaran-cepat-merambat-gedung-kejagung, "ACP Material Becomes the Cause of the Fire Quickly Spreading to the Attorney General's Building".
Sriwijaya State Polytechnic, Journal of Kinetics Vol. 9, No. 03 (November 2018): 1 - 6 1 Issn: 1693-9050 E-Issn: 2623-1417 Https://Jurnal.Polsri.Ac.Id/Index.Php/Kimia/Index Processing of Low Density Polyethylene (Ldpe) and Polypropylene (Pp) Waste into Alternative Liquid Fuel Using The Prototype of Pyrolysis Thermal Cracking Processing Of Low Density Polyethylene (Ldpe) And Polypropylene (Pp) Waste Into Alternative Liquid Fuel Using The Prototype Pyrolysis Thermal Cracking Yohandri Bow1,A), Zulkarnain1 , Sutini P. Lestari1 , Steven R.M. Sihombing1,b), Siti A. Kharissa1 , Yosirham A. Salam or Zotero
Handayani S, Purwanto WW, Dewi EL, Roekmijati D, Soemanto W. Synthesis and Characterization of Sulfated Ketone Polyether-Ether Electrolyte Membranes (Sri Handayani).
Plavčić P. Polieter eter keton u vodenom okolišu [Internet]. Available from: https://urn.nsk.hr/urn:nbn:hr:149:626502
Wang P, Zou B, Xiao H, Ding S, Huang C. Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK. J Mater Process Technol. 2019 Sep 1; 271:62–74.
Dipak G. Vamja, G. G. Tejani, 2013, Experimental Test on Sandwich Panel Composite Material, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2, Issue 7, July 2013 (IJIRSET), Vol. 2, Issue 7, July 2013, ISSN: 2319-8753.
Bahari, Choirul Anam, 2019, Utilization of Aluminum Composite Panel (ACP) Pieces as Work Station, Seminar on Planning, Design, Environment, and Infrastructure Technology, ISSN (Print): 2715-4513, FTSP ITATS - Surabaya, August 28, 2019 ISSN (Online): 2715-4599
Ajun Hariono, Azhar Pangarso Laksono, Rahmandia Prasetia, Muhammad Firhand Agustio, 2023, Fire Safety Performance of the Use of Aluminum Composite Panel (ACP) In Building, Journal of Settlements, Volume 18 Number 2, pp. 92 –102, November 2023 ISSN: 1907 – 4352, E-ISSN: 2339 – 2975
Prantasi Harmi Tjahjanti, Iswanto, Edi Widodo, Sholeh Pamuji, 2023, Examination of Thermoplastic Polymers for Splicing and Bending, Nano Hybrids and Composites, (Volume 38) Pages:87-97, ISSN: 2297-3400, DOI: https://doi.org/10.4028/p-8myjhn, https://www.scientific.net/NHC
Prantasi Harmi Tjahjanti, Rachmat Firdaus, Iswanto Iswanto, Ahmad Nova Irfian, 2022, Corrosion Protection Of Low Carbon Steel By Coating Of Graphene Oxide Nanoparticles And Galvanization Process, Journal of Nanostructures (Abbreviation: J Nanostruct), Articles in Press, Accepted Manuscript, Published 01 January 2022, https://jns.kashanu.ac.ir/issue_15362_15363.html, Volume 12 (2022), Issue 1.
Prarantasi Harmi Tjahjanti, Rachmat Firdaus, Iswanto, Rizky Nurcahyo, Sofia Ariyani, Andita N.F.Ganda , 2020, Utilization of Graphite Bars on Used Batteries Become Coating Material for Steel, International Journal of Emerging Trends in Engineering Research, Volume 8. No. 6, June 2020, Pages: 2481-2485, ISSN 2347 – 3983, https://www.academia.edu/43635512/Utilization_of_Graphite_Bars_on_Used_Batteries_Become_Coating_Material_for_Steel
Prantasi Harmi Tjahjanti, Darminto, Wibowo Harso Nugroho, Andita Andita N.F.Ganda, 2019, Study of Corrosion Penetration Rate on Composite Materials EN AC-43100 (AlSi10Mg (b)) + SiC*, International Journal of Integrated Engineering (IJIE), Vol 11 No 6 (2019), Publish: 2019-09-05, ISSN : 2229-838X, e-ISSN : 2600-7916
https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/2795
Prantasi Harmi Tjahjanti, Mulyadi, A. Zubaydi and S.H. Sujiatanti, 2019, Finite element analysis of material AlSi10Mg(b) and AlSi10Mg(b)+SiC*15p, Journal of Engineering Research, October 2019, pp. 50-56, Published: 2019-10-28, ISSN : 2307-1877 ,e-ISSN : 2307-1885 https://kuwaitjournals.org/jer/public/journals/special_issue_1/6.pdf]